|
Testimonials
Hello my name is Traves Tappan with T&T Refinishing serving Southern Idaho (208)961-0069. I used the Grizzly Grip on a residential front walk. (1) I power washed the surface then dry. (2) then applied the primer then waited about 15-20 minutes till dry. (3) then applied the first coat of Dolphin Gray Gizzly Grip then wait approximatly 2 hours until dry enough to apply the second coat you need to let dry approximatly 24 hours before full use. The results were assounding, it made such a difference in the front visual of the home. The home owners are considering having the garage Grizzly Gripped as well.
Click thumbnails for a closer view
Hi, my name is Art Bailey. I am a California state licensed contractor, and my company is: ADX REFINISHING. I had a 14'L x 8'W concrete deck with moderate cracking from shifting and settling. I pressure washed the deck and let dry for one day. I came back the next day to fill and repair all cracks. First, I applied the XL primer, letting it dry 45 minutes, then I applied Safari Tan Grizzly Grip. I think this is a fantastic product and was impressed with the roll out and set up. The property owner was also very impressed, and had questions of "What else can you do with this?". I am looking forward to future work with this product. If you have any questions, please do not hesitate to call me at (916)813-9418.
Thank you, Art Bailey.
Click thumbnails for a closer view
(1) Garage floor that will be recoated in grizzly grip, note, the rough areas that will be filled in by the thickness of the grizzly grip product. (2) Garge floor refinished in Grizzly Grip (battleship grey) by Arjay Refinishing, (815)483-3790, Lockport, Illinois. (3) Another look at the refinished garage floor in Grizzly Grip Battleship Grey.
Click thumbnails for a closer view
Hi, my name is Beth Newcomb. I just completed using your product to cover some old interior wooden steps (our house is 84 yrs old) that had remnants of old linoleum/tar paper on them. These are high-traffic steps leading to the back door and basement, formerly covered by carpet. I also applied your product over the existing linoleum on one part of the stairs where it was too difficult/toxic to remove. The outcome is great and I'm quite pleased. Your product works great to disguise uneven floor boards and other defects. I would send a picture if I could copy it on to this email. I would only emphasize not to spread it on too thick (I did a bit) and to use the curing accelerant (I forgot about the little bottle), particularly out here in Colorado. -Beth
Here are some before and after pictures of a Chevron airplane hanger refinished in grizzly grip (aliphetic) white, by Techni Finish (Leo), Lafayette, LA. 337 232-0465.
Click thumbnails for a closer view
Phoenix Refinishing & Coating, LLC. (1) Fire house to have their cement refinished in Grizzly Grip. (2) Repair working being patched before refinishing. (3) Half-way coating in Grizzly Grip. (4) Floor completely coated in Grizzly Grip Battleship Grey. (5) Tape applied for Safety Yellow Grizzly Grip. (6) Half the floor in Safety Yellow. (7-9) Finished floor refinished in Battleship Grey with a Safety Yellow border. Note the finished product with heavy fire trucks on the surface. (10) Holding area for the fire department equipment.
Click thumbnails for a closer view
I loved using the Grizzly Grip "Sealer" on the Bed Liner. It went from a dull tired looking cab to a new shiny Truck Bed and Rails.
Click thumbnails for a closer view
|
 |
 |
 |
|
|
This is a truck bed liner that was coated in 2005. You can see the sun will dull out on all truck bed liner coatings eventually. |
This shows how our waterbase sealer can bring back the original shine. This sealer can be applied to any truck bed liner coating. |
Another view of half the truck bed liner coated with our waterbase sealer. You can see the dramatic difference from old to back to original shine. |
|
|
 |
 |
|
|
|
This shows the entire truck bed liner recoated with our waterbase sealer. Our waterbase sealer dries to the touch in 20 minutes and is ready to go after 12 hours. |
Another view of the entire truck bed liner recoated with our waterbase sealer. We also carry a solvent base sealer that should ONLY be used when solvents will be spilled or used on a truck bed liner sealer. |
|
|
Here are some pictures of an old green John boat. I sprayed it using Grizzley Grip "Dolphin Gray".
Thank you for your time and effort along with all the questions that you answered.
Thanks,
Leon
Click thumbnails for a closer view
I just completed coating my 84 CJ7 with your product and would be happy to forward a picture or two as to how well it worked...
It worked out quite well for us. Application was very easy and coverage was great. My son and I simply
followed your directions and this was the result. It drew quite a number of looks and inquiries at the
NASCAR race this past weekend!
Sincerely
Wayne Cockrell
Lewisville TX.
Click thumbnails for a closer view
The bike turned out great after all. The green went on great, but the 1st coat of the black looked terrible, so I put the 2cd coat on heavy as suggested and as you can see matched quite nicely. Even the guys at the BMW dealership liked it.
Paul
Click thumbnails for a closer view
Attached are a few pics to see what I have done with GG. It was a pleasure speaking with you the other day about the different coating options.
Andy LeJeune CGG
Chief Garage Guy
Click thumbnails for a closer view
I have to tell you I absolutely love your products.
The Grizzly Grip, both sealers are awesome. I even found other uses for
the liner and sealers - its all perfect. You guys rock!!!
Thank you also for all the advice, technical assistance, and hand holding, it made
it very easy for success.
Michael
From Crystal Connection (252)355.8250
Click thumbnails for a closer view
We used the charcoal gray aliphatic over ¾" pressure treated plywood. Attached are some photos of our trailer.
Ron & Renee Rippel
Iowa
Click thumbnails for a closer view
 |
|
|
|
|
|
|
| 
